Rent of manual zatirochny machines

Manual plaster zatirochnye machines apply to alignment and a finish of the different plaster and other pokryvochny structures applied on horizontal, oblique and vertical surfaces. These machines use also for a finish of cement couplers the basis under floors and roofs from soft rolled materials, at single-layer alignment of gipsobetonny partitions, a finish of surfaces at production of steel concrete prefabricated elements of building constructions, for grinding of proshpaklevanny and mosaic surfaces, facings of facades of buildings, etc.

Plaster zatirochnye machines let out with an electric actuator which can be built in the machine or bring into rotation an operating part (a zatirochny disk) through a flexible shaft.

Plaster zatirochnye machines with the built-in electric drive let out one-disk and two-disk — with outside and internal disks. As the drive of these machines use the asynchronous three-phase electric motors with a short-circuited rotor working at current of the increased frequency of 200 Hz at a voltage of 42 V.

Machines connect to the external alternating current main of 220/380 V, with a frequency of 50 Hz via the frequency converter of current or to the special three-phase alternating current main with a frequency of 200 Hz and of 42 V. Low tension provides electrical safety of the operator. Machines are completed with a current-carrying cable which is connected to the power source by means of a fork of plug connection.