Napylyaemy pith covering. Nanocork.

The Kalita-KZ company is glad to you to offer revolution in construction - a liquid nano covering, nanotechnological innovative environmentally friendly material, a liquid dusting of front and internal coverings of rooms. Kalita-KZ LLP the only and direct supplier in Kazakhstan.

• decorative

• breathing (the ventilated facade)

• water-repellent and vapor-permeable

• thermoinsulating, heat-insulating

• sound-absorbing, noise-insulating

• it is resistant to aggressive substances, Wednesdays

• it is fire-resistant

The liquid nano dusting is the patented product used as a heat insulator, a sound insulator, a shumoizolyator, a heater, a hydroinsulator, an antiskid and corrosion-resistant coating, a decorative covering and warming of facades and roofs in a wide range of construction, with multipurpose opportunities of application. Thanks to the properties it is represented as the only unique product in the market. The liquid nano covering napylyatsya on any facades (a brick, a tree and metal). Possesses good coupling with glass, with a ceramic tile, with cement plaster, with concrete, with a brick, with metal, with an asbotsement, with plaster, with a chipboard, OSB, with polystyrene, etc. Before drawing careful alignment of a surface and seal of small cracks and poles is not required.

It is applied in all construction branches to warming and a waterproofing of facades, at the same time effectively protecting designs from moisture and cold, creates a notable barrier to noise and vibration, gives unique decorative effect. For frame housing construction the napylyaemy covering has excellent adhesion with all materials in the construction industry! It is easily applied to finishing of facades and internal rooms of the buildings which are under construction on system of the Canadian technology of houses of panel SIP-!! Layer thickness in 3 mm hides all technological elements of connections of plates! Difficulties in drawing and development of this material NO — it does it unique and modern!

At a dusting of a covering the durable, reliable decorative covering which does not have analogs among front, finishing materials is created! Gives unique decorative effect: facing of facades, internal walls, partitions and ceilings, roofs, heat and noise isolation garret and basements, device of heat-insulated floors, waterproofing of roofs and terraces, mitigation of noise, vibrations of a resonance of buildings, anticorrosive covering of metal dashboards and cars, partitions of sea and river crafts, noise isolation of cars and cabins, decorative noise isolation of discos and studios.

In connection with the quality polymers high-permanent to any loadings, are combined in a liquid nano covering and turn it into a covering, waterproof, vapor-permeable, flexible, resistant to influence of UF of beams, ozone and big range of aggressive substances.

Napylyaemy a nano covering it is resistant to alcohols, turpentine, ammonia, sodium hydroxide, lactic acid (85%), hydrochloric acid, copper sulfate, nitric acid (60%), lemon acid, sulfuric acid.

In city infrastructure there is a set of residential, office buildings, boiler, transformer substations and other constructions with big wear. Often the current financing is not enough for timely carrying out repairs of all these objects. Application of napylyaemy liquid thermal insulation will allow "to preserve" them, that is to suspend destruction process for long term.

Why liquid nano covering.

1. ECOLOGY. One of the most important advantages — ecological purity and high natural potential of protective properties from harmful radiations. Scientists proved that the nano covering reliably protects from abnormal fields, weakening action of geopathogenic zones for 75-80 percent.

2. DURABILITY in combination with softness and elasticity, moisture resistance, warmth, optimum resistance to sliding.

3. SOFTNESS. Thanks to the structure, extremely elastic material which very well compresses. But it is even more valuable that after removal of loading it almost completely restores a former form and the sizes.

4. SILENCE. It is the best of natural warm and sound insulators. They allow to reduce fluctuations and vibration of a sound in rooms. Therefore they can be used in musical studios, concert halls, movie theaters, libraries.

5. Besides, fine vibroinsulator. Material very easy (104-120 kg/m3), steady against compression (the maximum pressure of 10000 kg/sq.m) is also not subject to shrinkage. Walls and partitions will be absolutely "not to taste" to parasites and rodents.

• anti-allergenicity;

• antiseptichnost;

• anti-static character (dust does not accumulate);

• considerable decrease in level of radioactive radiation;

• isolation from an adverse effect geo-and techno and pathogenic zones, and also from electromagnetic radiations that it is difficult to overestimate presently when sharply there was a problem of protection of the person against negative consequences of scientific and technical progress.

Color scale, more than 20 types.

Important features of a liquid dusting

Practicality — simplicity in application. Universality — a covering is suitable for any basis: reinforced concrete, plaster, natural stone, facing brick, silicate blocks, plywood, OSB, tree, asbestos, metal, glass.

Elasticity — the stopper allows to receive a flexible and elastic covering (stretching to 33% even at low temperatures) that allows to close the microcracks appearing over time in plaster or to compensate the draft of designs.

Thermal insulation is a warm covering (to =0,038) which will protect your house from cold and a heat. Natural feature, is ability to maintain internal temperature not lower than 0 degrees at a frost outside and not higher than +20 degrees at high temperature outside of the house.

Thanks to these natural properties of a wall of the house will not freeze in the winter that will allow to save on heating of the house and will not overheat during the hot period.

Besides, put on roofing (in particular on metal) coverings, gives the chance to inhabited garrets during the summer period to maintain constant temperature not higher than +20 degrees.

The noise isolation — thanks to the sound-proof properties for example, on coverings from a metal tile, is capable to weaken considerably noise of a rain during summer heavy rains.

Protection against water — water-repellent qualities. Putting material on a facade gives reliable protection against water penetration, increasing service life of walls.

Vapor permeability — medical nature of an internal microclimate of our houses consists in an obstacle to formation of a mold. The Napylyaemy covering carries out function of a membrane, allowing walls of your house to evaporate the moisture which collected inside, counterbalancing and regulating humidity.

High decorative effect — one of the most important features napylyaemy coverings — receiving an esthetic decorative covering, both at preservation of its natural color, and at pigmentation and coloring in its any color on RAL scale.

Besides application at external thermal insulation warming of facades of buildings height to one-two floors gives additional economy on anchors, shtyrevy fastenings, the reinforcing grid as material is capable to sustain a body weight and has a surface to which the plaster layer or paint very well sticks (if there was a need to change appearance of a facade).

The liquid nano covering is the liquid mix on a water basis consisting of a natural pith crumb and special polymers which is applied with method of air dispersion on any type of materials and on any surface, both vertical, and horizontal.

Use of this material allows to receive a natural pith covering with very high coefficient of coupling with the covered surface. The received covering keeps all qualities of a traditional cork:

• does not decay;

• the fungus is not terrible;

• does not accumulate static electricity and therefore does not attract dust;

• environmentally friendly material;

• vapor-permeable;

• warmly sound-proof;

• steady against influence of an atmospheric precipitation, UF of beams and aggressive substances (alkalis, acids, solvents).

• The pith covering can be put at a temperature up to-5 degrees Celsius. Time of hardening depends on type of the covered surface, ambient temperature and thickness of drawing and varies from

8 till 48 o'clock. Guarantee of 10 years.

One of secrets of a liquid nano dusting is a reaction of a stopper to temperature. Material warm by nature, at the constant subzero temperature of air material temperature never happens below a mark zero degrees.

At influence of high temperature, functions as an effective barrier to heat, maintains optimum temperature indoors, creates a cool and comfort in the house. Damp walls generally lead to destruction of material of designs. Water in its various state: liquid (moisture atmospheric, the moisture getting, moisture capillary) and gaseous (moisture of condensation and water vapor) can lead to consequences when it is impossible already to do without removal of an old covering, drawings new and processing by the materials which are interfering penetration of water and at the same time allowing to get to air to a wall and to dry without changing its appearance. Feature of an image of behavior of a liquid nano covering: it allows to give an impetus to process of improvement and drainage, to increase the speed of a filtration and evaporation of the moisture which is already contained in a wall.

Other secret is natural property of a shumonepronitsayemost of a stopper. When using a covering as noise-attenuating, anti-vibration, today it is the most practical.

Used both inside, and outside, it is capable to weaken noise to 65dB, creating a barrier to a noise source where there are thin partitions from gypsum cardboard, in interfloor overlappings, in technical rooms where there are moving mechanisms and the equipment.

It is easily applied, does not create inconveniences at application, does not create dust, does not demand special preparation of a surface.

Directly napyly on a surface, immediately we receive the end result: the protective multipurpose covering possessing high esthetic characteristics.

It is without effort pigmented according to RAL scale. The product based on water, not toxic, simple in use, is required only mixing of components by a low-speed drill to homogeneous mass.

It can be applied on any type of materials and surfaces with method of air dispersion by the ordinary compressor of 5 atmospheres and the gun for hard putty. Large volumes can be carried out by method of airless dispersion by the special equipment for plaster.

After the first thin layer intended for coupling, final finishing is made by the second layer to thickness reaching 2,5 — 3 mm.

It is used for facing and warming of facades, internal walls, partitions and ceilings, thermal insulation, a waterproofing and a noise isolation garret and basements, loggias and balconies;

device of heat-insulated floors;

waterproofing of roofs and terraces;

mitigation of noise, vibrations and resonance of buildings;

anticorrosive covering of metal dashboards and cars, partitions of sea and river crafts;

noise isolation of cars and cabins, decorative noise isolation of discos and studios.

Thermal insulation of walls, capacities, pipes, roofs, facades, a floor, at home, pipelines, capacities, pipes, a bath with application of napylyaemy pith thermal insulation.

It is highly effective in thermal insulation of facades of buildings, roofs, internal and external walls, slopes of windows, concrete floors, pipelines of hot and cold water supply, steam lines, air ducts for central airs, cooling systems, various capacities, tanks, trailers, refrigerators, etc. It is used for a condensate exception on pipes of cold water supply and decrease in heatlosses according to Construction Norms and Regulations in systems of heating. Application of superthin thermal insulation in rooms - 18C products intended for storage meat, for the purpose of deduction, preservations of cold, and also its application on elevators and poultry farms

Properties - the unique cellular structure consisting of tiny cages. Each cage has the form of a 14-sided polyhedron, and the space of an internal cage is completely filled with airfigurative gas mix. Properties result from its structure and a chemical composition of extremely strong and flexible cellular membranes which are characterized by moisture resistance and air tightness.

As about 89% of fabric of bark consist of gas substance, density extremely low, about 0,12 - 0,20 that testifies to a huge disproportion between the volume and weight of material.

Treat unique and valuable properties:

Ease:

Very easy can also remain on a water surface. Throughout many millennia this property remained the most obvious and its outstanding feature. Since ancient times the stopper was used in fishing tools.

Elasticity and elasticity:

Cellular membranes of a stopper extremely flexible that does it contracting and elastic. It means that it can take the initial form even after deformation. These and other features are explained why the stopper became necessary material for production of bottle traffic jams.

These physical qualities promote that the stopper can densely nestle on walls of a bottle neck. When it is exposed to strong pressure, gas in cages compresses and considerably decreases in volume. At release of pressure the stopper at once takes the initial form and volume, without leaving any mark from the fact that was exposed to any essential deformation.

Impermeability: Existence of a suberin (cumulative mix of fatty acids and complex organic alcohol) does a stopper impenetrable both for liquids, and for gases. As a result, it does not decay that does it to one of the best corking materials.

Insulating and fireproof qualities:

Stopper value is also defined by low conductivity of heat, a sound and vibration. This consequence of the fact that gas elements which it contains are closed in the tiny, impenetrable chambers isolated from each other by moisture resistant material. This property does a stopper to one of the best natural warm and sound-proof materials.

Wearability:

The stopper surprisingly of an iznosoustoychiv also has high coefficient of friction. Thanks to the cellular structure it is least subject to influence or friction, than other firm surfaces.

Hypoallergenic properties:

The stopper does not absorb dust that helps to protect from an allergy and does not threaten the people suffering from asthma. It also possesses invariable structure that is a guarantee of efficiency of this material.