Currency KZT
Floors industrial bulk with rigid and elastic multilayered system 4610 5710 buy in Astana
Buy Floors industrial bulk with rigid and elastic multilayered system 4610 5710
Floors industrial bulk with rigid and elastic multilayered system 4610 5710

Floors industrial bulk with rigid and elastic multilayered system 4610 5710

Products from producer
In stock
Reconfirm the price with seller
Shipping:
Seller
Kazakhstan, Astana
(View map)
Technical characteristics
  • Country of manufactureKazakhstan
  • Anti-slip propertiestYes
  • AntistaticityYes
Description

Rigid and elastic multilayered sistema4610 5710

Application: For the device of the coverings of a floor maintaining mechanical influences of considerable intensity at the movement of wheel transport on rubber and plastic to the course, carts on metal wheels, and also chemical influences of water, fuels and lubricants, the diluted acids and alkalis of average intensity. It is resistant to shock influences to 10 kg, to shift loadings, to differences of temperatures and disclosure of cracks in the basis to 0,8mm.

Chastichnovyravnivayet basis.

Operation Material Expense

kg/sq.m

Tool,

way

1. Primer Ризопокс™ - 1100 0.3 ¸ 0.4 The roller resistant to solvents with a pile length the 15-18th

WITHOUT POWDER SAND

2. Drawing an elastic polyurethane membrane Ризопур™ - 4120 2.0 ¸ 2.3 Gear pallet

(profile 48 type) or

adjusting trovel (raklya).

To process the needle roller.

3. Drawing a rigid power layer Ризопур™ - 4120 1.8 ¸ 2.2 Gear pallet

(profile 48 type) or

adjusting trovel (raklya).

To process the needle roller.

Filling The calcinated quartz sand, fraction 0.4-0.8mm 5.0 ¸ 6.0 Manually to a state "under a fur coat".

Not to leave on a surface of damp spots.

4. Cleaning and

preparation of a surface

Sweep away excess sand.

To remove dust the industrial vacuum cleaner.

5. Front layer Ризопокс™ - 4610

or

Ризопокс™ - 5710

with the general

expense

0.6 ¸0.8

(it is put for 2-3 layers)

The roller resistant to solvents with a pile length the 8-12th not to allow formation of pools and potek.
TOTAL

General thickness: 4.0 ¸ 4.5mm

Recommendations:

Before drawing a covering the surface of the basis has to be appropriately prepared (see requirements to the basis in descriptions on materials). For achievement of high shock resistance, resistance to disclosure of cracks, to differences of temperatures and resistance to high dynamic loadings the basis has to have flatness no more than 4 mm by 2 m. Before drawing a covering local defects of the basis: hollows, chips, small on the area of "wave" with abrupt edge have to be eliminated.

Contact the seller
Floors industrial bulk with rigid and elastic multilayered system 4610 5710
Floors industrial bulk with rigid and elastic multilayered system 4610 5710
Shipping method
Compare0
ClearSelected items: 0