- BrandFirestone Building Products
- Country of manufactureUnited States
Aluminum drainage lath of Aluminium Drain Bar
1. Description
The drainage lath of Drain Bar of production Firestone is specially intended for mechanical fixing of Epdmmembrany RubberGard on roof eaves in the ballast and inversion Firestone systems.
2. Preparation
The basis has to be strong, dry and suitable for mechanical fastening. At change of a form of a drainage lath all detachable surfaces have to be rounded and processed by a file for the purpose of elimination of agnails and sharp edges.
3. Installation
Fix a lath through in advance punched openings in the basis by means of the fasteners delivered complete with it. The interval between the next parts of a drainage lath has to make about 6 mm. When passing internal and external corners the lath should be cut. Laths have to fasten at distance no more than 25 mm from each end of all parts.
4. Consumption rate
Depending on length of a concrete element.
5. Technical characteristics
■ Material - Extruded aluminum
■ Length (m) - 3,05
■ Width (mm) - About 102
■ Thickness (mm) - From 1,6 to 2,8
■ Openings (mm) - 20 openings 7,1 with an interval of 152 mm
■ Fasteners - the Screws from stainless steel 38,1 mm long with a six-sided head supplied with rubber washers
6. Packing / Storage / Expiration date
Packing: 10 pieces in cardboard packing with fasteners and washers.
Storage: To store in the sealed original packing protected from atmospheric actions.
Expiration date: It is not limited on condition of observance of rules of storage.