Plastic storm water inlets are intended both for a local drainage system, and for collecting storm waters from a roof (installation of plastic storm water inlets in such cases is made under a drainpipe). Storm water inlets are manufactured of the adapted plastic and maintain cross moving of the car. Storm water inlets are separately completed with a basket for collecting garbage and two partitions (siphons) which interfere with a contamination of underground part of system of a drainage system, in a case even if the basket is overflowed. Depending on estimated loads of the choice there are lattices from cast iron, steel and plastic. On all face walls of plastic storm water inlets connections with a pipe d from 70 to 145 mm are provided. With a big height, plastic storm water inlets can be mounted over each other, at the same time the lower part of the top plastic storm water inlet needs to be removed on a mark. At installation of plastic dezhdepriyemnik it is necessary it will be convinced that the surface adjacent to a drainage system is 3-5 mm higher than its upper edge.
CharacteristicsThe main | |
---|---|
Producer | Gidrolica |
Country producer | Russia |
Type of a drainage system | Superficial |
Type of an organized drainage system | External |
Type of a superficial drainage system | Dot |
Loading class | AND, IN |
Drainage system material | Plastic |
Color | Black |
Additional characteristics | |
Length | 300 mm |
Width | 300 mm |
Height | 300 mm |
Weight | 1,5kg |