- BrandFirestone Building Products
- Country of manufactureUnited States
Metal lath of Metal Batten Strip
1. Description
The metal lath of Metal Batten Strip of production Firestone is intended for mechanical fastening by roofing EPDM of a membrane RubberGard and aprons of adjunctions of details of a roof according to technical requirements and recommendations of the Firestone company.
2. Preparation
In case of need cuttings of a metal lath on the place all surfaces of cuts have to be rounded and processed by a file for the purpose of elimination of agnails and sharp edges.
3. Installation
Place metal laths of Metal Batten Strip according to instructions on installation and attach them to the basis with use of Firestone fasteners, suitable for this purpose. In order to avoid a bend of a lath it is necessary to begin fastening with one end of a lath and to move ahead to another. It is necessary to draw or to dovorachivat fasteners.
4. Consumption rate
According to requirements. The next laths have to find at each other and fasten in the place of an overlap one fastener.
5. Packing / Storage / Expiration date
Packing: 50 pieces (3,05 m) in a cardboard tube (152,4 mm). Storage: To store in the sealed factory container protected from atmospheric actions. Expiration date: It is not limited on condition of observance of rules of storage.