Currency KZT
Liquid Pourable Sealer S 10 sealant of Part A and B buy in Astana
Buy Liquid Pourable Sealer S 10 sealant of Part A and B
Liquid Pourable Sealer S 10 sealant of Part A and B

Liquid Pourable Sealer S 10 sealant of Part A and B

Products from producer
In stock
Reconfirm the price with seller
Payment:
Shipping:
Seller
Kazakhstan, Astana
(View map)
Technical characteristics
  • BrandFirestone Building Products
  • Country of manufactureUnited States
Description

Liquid Pourable Sealer S%10 sealant (Parts A and B)

1. Description

Liquid Pourable Sealer sealant of production Firestone represents the two-component sealant intended for ensuring waterproof consolidation around small pipes, bunches of the pipes, dvutavrovy beams and other designs coming to a roof with use of a special tray.

2. Preparation

Surfaces on which putting Pourable Sealer sealant is supposed have to be pure and dry, and also not have loose and foreign materials, traces of oils, lubricants and other pollution. In case of long storage of sealant at the lowered temperatures before use.

3. Drawing

After production and installation around the isolated design of a special tray according to recommendations of the Firestone company, pour in Part B in Part A and carefully mix the received mix, using a drill with a nozzle in the form of a mixer. Process of hashing should be continued until material of Part A does not gain evenly black color. While in material gray streaks remain, process of hashing needs to be continued. Hashing should be made so that the material which is at a bottom and walls of a container moved on all volume and was completely mixed. Accurately fill in carefully mixed Pourable Sealer sealant in the established tray. Fill a tray so that the possibility of rolling water from the isolated design was provided.

4. Consumption rate

1 portion of mix of part A and part B can be used for filling of the volume of 3375 cm3 (for example, perhaps single filling of a cavity of 15 x 15 x 15 cm in size or triple filling of a cavity of 15 x 15 x 5 cm in size). Thickness of the put layer has to make not less than 50 mm. Dilution of this material is not allowed.

5. Technical characteristics

■ the Basis - Polyurethane
■ Colour - Black (after mixing) / Part A: Light gray / Part B: Black
■ Solvents - Are not present
■ the Maintenance of a dry vv (%) - 100
■ Viscosity (joint venture) - Part A: 250.000 - 325.000 / Part B: Liquid, easily fluid
■ Specific weight - Part A: 1,25 / Part B: 1,14
■ Temperature of ignition (°C) - Part A: 185 / Part B: 218
■ Viability - No more than 30 min. (mixing at 22 °C)

6. Packing / Storage/expiration date

Packing: 4 sets on 1 gallon in a cardboard box

Storage: To store in the dry, pure place in the sealed factory container at a temperature from 15 °C to 25 °C. Not to allow hit of a direct sunlight until readiness for use.

Expiration date: 12 months on condition of storage according to the above instructions. At influence of the increased temperatures the expiration date is reduced.

7. Precautionary measures

Storage and use near sources of fire or an open flame is not allowed. Not to smoke in usage time. Material is intended only for industrial application. To use only in well aired places. To avoid hit on skin and in eyes. Liquid Pourable Sealer sealant extremely difficult is removed from the places polluted by it. During the mixing and transfusion of this material it is recommended to use disposable gloves. When mixing and drawing it is necessary to put on goggles. See. Reference guides according to safety measures during the work with the corresponding materials. Avoid moisture hit. Interaction with water can generate explosive pressure in the closed container. For washing off it is recommended to use white spirit, a benzinrastvoritel or kerosene.

Contact the seller
Liquid Pourable Sealer S 10 sealant of Part A and B
Liquid Pourable Sealer S 10 sealant of Part A and B
Shipping method
Payment method
Compare0
ClearSelected items: 0